Posts Tagged ‘Add new tag’

Latest Video from the Rebel Simcard Team showing the unlocking of a locked iphone on the UK O2 Network being using on the latest iphone 3.0 OS beta 2

Advertisements

Solution Point Limited the creators of Rebel Simcard have announced availablity of its Latest product aimed at enthusiasts and hobbiest to scan data communication between network simcard and mobile phones.

This is a tool kit to help scan network simcards so we can add support to the rebel sim for new network simcards that come out and continue to dominate the mobile phone simcard unlocking technology Industry.

This shows how serious we take our leadership of the simcard unlocking Field.

Also this toolkit can be used be the enginners of tomorrow to learn about APDU’s and scanning methods.

Scan APDU Commands From GSM/UMTS Simcards. Ideal To Learn more and to help us make rebel sim work on the newer phones that just released. Hardware Based APDU Sniffing for RS232 Packets.


Scan APDU Commands From GSM/UMTS Simcards for Analysis

Hardware Based APDU Sniffing for RS232 Packets.

All Software Required is here

These are instructions on how to jailbreak and Activate your 3G iPhone to the 2.1-2.2.1 iPhone firmware using QuickPwn for Windows.

We always advise to use itunes to Activate you iphone 3G.

However many users who have purchased an iphone 3G from another country and do not have the orignal network simcard cannot do this on itunes online.

This Tutorial can Activate a non activated iphone 3g and also can jailbreak using the same method.

Step One

Create a folder called Pwnage on your desktop.

Download the following files and place them in the Pwnage folder you just created:

QuickPwn-225-2.zip

FOR THOSE WHO WANT TO UNLOCK:

2.2.0 (3G): iPhone1,2_2.2_5G77_Restore.ipsw

FOR THOSE WHO DO NOT WANT TO UNLOCK:

2.2.1 (3G): iPhone1,2_2.2.1_5H11_Restore.ipsw

Extract the QuickPwn-225-2.zip file to the Pwnage folder.

Step Two

Connect your iPhone to the computer and launch iTunes.

Select your iPhone from the list of devices on the left. Now hold down shift and click the Restore button. Restore is preferred as it won’t create any wasted space on your iPhone.

Navigate to the Pwnage folder on your desktop and select the firmware ipsw. Click the Open button to continue.

Step Three

Once iTunes has finished updating your iPhone to the desired firmware you may launch QuickPwn.exe from the Pwnage folder on your desktop.

Step Four

Make sure you iPhone is connected to the computer and click the blue arrow to continue.

Step Five

Click the Browse button to locate your iPhone firmware.

Step Six

Select the firmware ipsw from the Pwnage folder on your desktop then click the Open button.

Step Seven

QuickPwn will check to make sure the ipsw is valid. Click the blue arrow button to continue.

Step Eight

You can now select whether to Add Cydia, Add Installer, or Replace Boot Logos. Select the ones you would like to perform then click the clue arrow button

Step Nine

QuickPwn will now ask you to confirm your iPhone is connected via USB before continuing. Click the blue arrow button to proceed.

Step Ten

QuickPwn will now automatically put your iPhone into recovery mode. Once its in recovery mode you will be prompted to: Hold the Home button for 5 seconds, Hold the Home and Power buttons for 10 seconds, then release the Power button and continuing holding the Home button until your iPhone is in DFU mode.

Watch the prompts carefully and follow along.

Step Eleven

Once QuickPwn detects your iPhone in DFU mode it will begin the jailbreak process.

Step Twelve

Once jailbreaking is complete QuickPwn will inform you that it was successfull.

Supports mostly
2G Sim cards.

Universal Rebel Simcard support Virtually any phone using the Rebel STK Menu

Support for iPhone 3G firmware 2.1 or below 

Rebel STK Can change between 12 Modes

 

Download here